JHS Pedals PackRat | Distortion/Fuzz

The PackRat Modes:

1. The OG V1 (1979-83)

The OG mode is a perfect recreation of the first production RATs ever made. This era of roughly four years covers what is referred to historically as the V1 models. 

Early V1s are also known as the Fringe Logo model and can be identified by the letters R-A-T being in all capital letters with a slight fringe graphic coming from the typeface. The V1 also has small silver capped knobs and a Tone knob instead of the more familiar and later produced V2 Filter control labelling. From a circuitry standpoint, the V1 and V2 Big Box models are practically identical except that the V1's Tone control increases treble as you turn clockwise while the V2's Filter control decreases treble in that direction. 

When switching to the OG mode, you are activating the exact circuitry of my 1979 V1 Fringe Logo model, including the accurate Tone control rotation and taper.

Let us take a moment here to clarify: the V1 and V2 models are the exact same circuit, and simple adjustments to the Tone/Filter control can achieve identical sounds from each unit. 

JHS know that the super nerds are going to ask why they didn't include a Bud Box mode. Basically, Josh would consider the Bud Box RAT to be a V1, because it is almost identical other than having an input buffer as well as a couple of extra parts.

2. White Face V3 (1984-1986)

In 1984, the RAT transitioned into a smaller square enclosure with a new white rectangle logo. The word RAT was in all black caps inside the white rectangle; this model gained the White Face RAT nickname due to this aesthetic. In 1986, this same model had a logo change that simply inverted the white and black colours, resulting in the more familiar white rectangle outline and font on the black enclosure. 

This White Face model has gained a reputation as one of the holy grail RATs, and it even spawned a reissue in the nineties. The irony is that it is the same exact circuit as the previous Big Box V2 and the following Black Face 1986, as well as the 1989 RAT2. The White Face V3 update was a purely cosmetic change due to screen printing errors that needed to be solved. ProCo knew that the world wanted smaller pedals in the wake of brands like BOSS, DOD and Ibanez gaining more and more market share, and they wisely cashed in on the trend. 

With this said, why would JHS put this particular version in their PackRat if it is not any different than the OG? For one, nostalgia is a powerful thing, and secondly, this mode will switch to the reverse orientation V2-V3 Filter control with an entirely different feel and experience. In many ways it widens what many consider the sweet spot for the most beloved RAT tones.

Like you, JHS want to believe in magic models of their favourite pedals, but sometimes the magic is just because we like the look or the user experience of one version over the other. It's okay to admit that and move on. 

3. Turbo V5 (1989)

The heart of the RAT's tone comes from a design technique called symmetrical hard clipping. In this approach, a simple amplifier circuit amplifies the guitar's signal and pushes it across a pair of clipping diodes. The result is that these diodes clip off the top of the waveform of the guitar and create a type of square wave distortion. Every RAT until 1989 utilised a typical silicon diode, just like the DOD 250 and BOSS DS-1, but the new Turbo RAT used LEDs (Light Emitting Diodes). Yup, these are the same LEDs you see in flashlights, your car's dashboard, DVD players and almost every other electronic device on earth. This technique was a first in pedals (the same clipping style was used in the Marshall Guv'nor) and offered a completely new RAT experience.

The silicon diodes in previous versions have a lower forward voltage, resulting in a faster and more extreme clipping of the waveform. You could say this type of diode creates a very saturated tone. The Turbo's LEDs have a much higher forward voltage, so they don't activate or clip the signal as fast or as hard. It takes more signal to reach the point where they will 'cut off' the waveform, which causes the phenomenon we know as touch sensitivity. You can set the Distortion lower, and as you play lightly, you will have an overdrive tone; dig into your guitar and play hard, and hear more clipping/distortion.

It is also worth noting that this model was the first RAT that offered the sloped enclosure that we see today. It also featured the new on/off status LED that had made its debut one year earlier in the 1988 RAT2.

4. BRAT V6 (1997)

In 1997 ProCo got into the budget pedal game by releasing the BRAT and the Guitar Center exclusive, Roadkill. These two identical circuits with different and very nineties grunge aesthetics have the most changes so far in the evolution of this legendary circuit.  

This design added an input buffer circuit and soft clipping (inside the loop of the op amp) on top of the standard hard clipping of the previous RATs. We also see a return to the opposite taper/rotation Filter control and several capacitor value changes that alter the frequency response and characteristics of the distortion. 

5. Dirty V7 (2004)

In 2002, ProCo released a 2-in-1 RAT pedal called the Deucetone. This pedal allowed you to have two completely separate RATs and activate them independently or stack them together. It also introduced two brand new sounds into the RAT topology: Clean RAT mode and Dirty RAT. Due to the popularity of the Dirty RAT mode, they released a single pedal called You Dirty RAT that featured that single setting in a standard sloped RAT enclosure. This circuit utilises germanium diodes in the symmetrical hard clipping section of the circuit. This technique gives the most saturation and waveform clip-off of any version ever made. 

In addition to the diode changes, this model has several different capacitor value changes resulting in a different distortion character and feel. 

6. LA (1986)

In 1986, Ibanez released the 10 Series line of pedals that included three RAT style pedals. The Super Product and Fat Cat held the position of accurate and traditional RAT style pedals, while the quirkier LA Metal was, in Josh's opinion, one of the best-modified RAT circuits of the eighties. 

It includes a great input buffer, several key capacitor changes for frequency response, and no clipping diodes at all. The distortion is produced by overloading or clipping the rails of the op amp. 

Josh doesn't play LA Metal, and we're guessing you don't either, but we promise you will love this mode!

7. Landgraff MO'D (1999)

Between 1999-2000, a man named John Landgraff started building pedals by hand in Pensacola, FL. Each one painted with a unique swirl paint job and wired point to point; John's pedals were and still are the true definition of boutique and gained a reputation for sounding amazing. His most popular pedal was the Landgraff Dynamic Overdrive, a take on the Ibanez Tube Screamer, but JHS' favourite was his distortion pedal that he called the MO'D, a distant cousin of the RAT and a really fantastic pedal in its own right.  

8. Caroline (2010)

A few years after starting JHS, Josh purchased a fascinating distortion pedal from a brand new company out of South Carolina. He remembers jumping on the phone and geeking out with the designer and head of the company Philippe Herndon. They talked about the circuit, his love for RATs and his clever take on the circuit. That pedal was called the Wave Cannon and when Josh started the PackRat project, it was obvious that Philippe was the friend he should bring along for the ride.

9. JHS Mode

In 2003 Josh managed a tiny guitar shop in Northwest Alabama. One day a man walked in with a vintage Small Box RAT and said he wanted to sell it. When the shop's owner said he wasn't interested, Josh said he was. He bought that RAT for $15, and this is most likely the single event that led him down the pedal collecting rabbit hole. That pedal stayed on his board for a decade, and when he started modifying and building pedals in 2007, he opened it up, learned the circuit and modded it to reflect a different kind of sound. Parts of that modification became the now discontinued JHS All American and the long-running JHS PackRat modification that they performed on thousands of RAT pedals from 2008-2018. The JHS Mode lets Josh keep what makes the RAT unique and add in a few of his personal favourite mods.