Skip to content DR Z Brake Lite SA stand-alone Attenuator - Peach Guitars
We are open for pre-booked appointments only. To learn more about our appointment system, click the button to the right
Opening Hours
DR Z Brake Lite SA stand-alone Attenuator
£399.00
 In Stock
CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Email
Request A One-On-One Appointment
Let us know what you would like to see, and our team will prepare everything for your one-on-one appointment at our showroom.
Preferred Appointment Time:
Products Of Interest:
* Required Field
Plek This Guitar
Please read the terms & conditions below before confirming that you wish for us to including a Plek setup on this guitar.
Choosing to have your purchased guitar Plek’d will delay the shipping. One of the team will be in contact with a rough ETA but we will endeavour to have your new guitar with you as quickly as possible. Current lead time is 2-3 weeks from the date of purchase.
If you choose to return the guitar after it’s had a Plek setup you will still be liable for the cost of the plek setup except for in cases where we’ve offered it as part of a promotion or offer.
View full terms & conditions
DR Z

DR Z Brake Lite SA stand-alone Attenuator

You asked for for it and we listened...Introducing the fully enclosed Brake Lite SA (Stand Alone.) Same guts as the combo mount Brake Lite, but able to be tossed in the gig bag for use with many different amps on the fly. The Brake Lite SA works with any tube amp up to 45 watts and can be used with 4, 8, or 16, ohm loads. The SA features 2 speaker outs that are wired in parallel. You can now run multiple cabs with ease.

The Brake Lite SA measures 6" x 5" x 3 ¼" and weighs in at 1 ½ lbs. Four ½" feet give plenty of clearance for resting on top of your amp. At the Zero setting the Brake Lite SA is fully bypassed. Each click yields more attenuation: 1=2dB, 2=5dB, 3=8dB, and 4=11dB.

Always use speaker cable to connect the Brake Lite SA to your speaker. When connecting a second cab you will be making a parallel load. Ex: a pair of 8 ohm cabs use the 4 ohm speaker out on your amp.

£399.00
 In Stock
View In Showroom
Request an appointment with one of our team
UK Next day delivery
Fast shipping with trusted couriers, get it next day!
Free UK delivery over £99
What you see is what you will get!
WAYS TO PAY:
Paypal, Visa, Mastercard, Maestro, Visa Electron & Delta
Description

You asked for for it and we listened...Introducing the fully enclosed Brake Lite SA (Stand Alone.) Same guts as the combo mount Brake Lite, but able to be tossed in the gig bag for use with many different amps on the fly. The Brake Lite SA works with any tube amp up to 45 watts and can be used with 4, 8, or 16, ohm loads. The SA features 2 speaker outs that are wired in parallel. You can now run multiple cabs with ease. 

The Brake Lite SA measures 6" x 5" x 3 ¼" and weighs in at 1 ½ lbs. Four ½" feet give plenty of clearance for resting on top of your amp. At the Zero setting the Brake Lite SA is fully bypassed. Each click yields more attenuation: 1=2dB, 2=5dB, 3=8dB, and 4=11dB.

Always use speaker cable to connect the Brake Lite SA to your speaker. When connecting a second cab you will be making a parallel load. Ex: a pair of 8 ohm cabs use the 4 ohm speaker out on your amp.

 
COMPARISON BASKET COMPARE