Strymon blueSky V2 | Reverberator

Reverberant Bliss.

Whether you're a classic spring reverb fan, a studio rack aficionado, or an ambient soundscape creator searching for new sonic textures, the sounds you are looking for are here.

blueSky provides three different reverb types: plate, room, and spring, and each type can produce everything from stunning realism to expanded sounds far beyond what would be physically possible, while always remaining musical and beautiful.

Intuitive and powerful tone shaping controls allow you to easily dial in an endless variety of inspiring sounds. And with ultra low noise, high performance 24-bit 96kHz A/D and D/A converters and a 20Hz to 20kHz frequency response, blueSky is equally at home on top of a studio console or in front of a valve amp.

All New Features.

Strymon's second generation blueSky offers true studio quality reverbs in a compact pedal, and adds significant new features, incorporating technological advancements, hardware improvements and design enhancements to give you additional flexibility, power, and ease of use on stage and in the studio.

Tone Shaping - A dedicated Shimmer knob and new Shimmer behaviours yield an inspiring variety of immersive new sounds. A new Mod switch allows you to select the modulation depth for each reverb type. A beautiful new Spring algorithm creates extraordinary vintage spring reverb sounds, as well as expanded spring textures and hauntingly unique interactions with an octave-down Shimmer.

Hardware Improvements - A premium analog JFET input circuit ensures superb responsiveness to your playing, and you can select mono or stereo input with the flick of a rear panel switch. In addition, you can now control blueSky with an expression pedal or MultiSwitch Plus. All this, plus a new ARM DSP chip provides more processing power for every sonic nuance, with less energy consumption on your pedalboard.

MIDI - Full MIDI implementation allows you to control just about every knob, switch, and setting remotely via the EXP/MIDI jack or USB. And you can save and recall all the new sounds you create via 300 onboard MIDI preset locations.

Take To The Skies.

blueSky features three reverb types, each with their own distinct flavour for every reverb application you may need. 

A high-quality vintage plate reverb gives you the smooth, crisp reverberations heard on classic records from the 60s and 70s. 

A versatile room reverb places your tone in cosy small rooms, massive arenas, and everywhere in between. Strymon's splashy spring reverb, a faithful recreation of the best vintage spring reverb circuits they could find, instantly adds character and retro mojo to any signal.

Tighten Things Up.

Dedicated tone controls make blueSky one of the most versatile reverb pedals around. 

blueSky's Low control tightens up the low end of your reverb by gradually dampening the low end frequencies, perfect for cleaning up muddy or boomy low end reverberations. 

For dark, moody reverbs, use the High control to roll back the high frequencies and dial in the exact tone you're looking for.

Bring On The Sparkle.

blueSky's unique Shimmer function can add sparkle or depth as well as expanded dimension and complexity to your tone by adding pitch shifting 'in the tank.' This artefact-free pitch effect has a distinctive organic sound. blueSky's Shimmer behaves differently depending on which reverb type is selected.

Turn the Shimmer knob up when using the plate reverb to add regenerative octave-up pitch shifting. With the room reverb, shimmer regeneratively adds an octave plus a fifth. When used with the spring reverb, an intriguing octave down pitch effect with adjustable LFO speed is achieved.

Add Some Movement.

There is a certain magic to the lush effects that can be created by modulating the lengths of the individual delay lines responsible for the reflections in a reverb tank.

With blueSky's Mod switch set to its light position, the delay lines are modulated to add subtle motion to the reverb tail.

With the Mod switch set to deep, the signal entering the reverb tank is also modulated, in addition to the individual delay lines within the reverb tank.

Complete Control.

blueSky features a full suite of powerful and intuitive reverb controls for easily dialling in your dream reverb tone in the studio or on the stage. 

A dedicated Mix control lets you determine just the right ratio of wet to dry signal, from no reverb at all, to 50/50 at 3 o'clock, all the way to full wet, reverb-only tones. 

blueSky's Decay control determines how long you want your reverb to ring out. Go from short, snappy reverb tails, to spacious, nearly-infinite reverberations. 

Pre-Delay lets you add space between your dry signal and reverb - a handy tool for maintaining clarity when using higher Mix and Decay settings.

• High impedance ultra low-noise discrete Class A JFET TRS stereo input.
• Low impedance independent TS stereo outputs.
• Expression pedal input allows the connection of a TRS expression pedal, MiniSwitch, MultiSwitch Plus, or TRS MIDI connection.
• USB jack for controlling via MIDI from a computer or for performing firmware updates.
• Dedicated Favorite & On/Off footswitches
• Premium JFET analog front end
• Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
• 520MHz ARM Superscalar processor
• 32-bit floating point processing
• 20Hz to 20kHz frequency response
• Audio Input Impedance: 1M Ohm
• Audio Output Impedance: 100 Ohm
• Strong and lightweight anodized blue aluminium chassis
• 9V DC power supply included
• Power requirements: maximum 9 volts DC centre-negative, with a minimum of 300mA of current
• Dimensions:
  • 4.5" deep x 4" wide x 1.75" tall
  • 11.4 cm deep x 10.2 cm wide x 4.4 cm tall
• Designed and built in the USA