Skip to content CIOKS Future Power Generation | CIOKS 4 Expander - Peach Guitars
We are open for pre-booked appointments only. To learn more about our appointment system, click the "OPENING HOURS UPDATE" banner below.
CIOKS Future Power Generation | CIOKS 4 Expander
£121.99
 In Stock
CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
Stock Email
Request A One-On-One Appointment
Let us know what you would like to see, and our team will prepare everything for your one-on-one appointment at our showroom.
Preferred Appointment Time:
Products Of Interest:
* Required Field
Plek This Guitar
Please read the terms & conditions below before confirming that you wish for us to including a Plek setup on this guitar.
Choosing to have your purchased guitar Plek’d will delay the shipping. One of the team will be in contact with a rough ETA but we will endeavour to have your new guitar with you as quickly as possible.
If you choose to return the guitar after it’s had a Plek setup you will still be liable for the cost of the plek setup except for in cases where we’ve offered it as part of a promotion or offer.
View full terms & conditions

CIOKS Future Power Generation | CIOKS 4 Expander

Flexible Little Member Of The Future Power Generation Series

When the celebrated CIOKS DC7 was released, it definitely caused a stir in the PSU market. With its ground-breaking low profile, low weight and high output connectivity, DC7 has quite rightly found its way onto thousands of pedalboards the world over. Now with the CIOKS 4 Expander, the range has increased to provide pedal devotees even more low noise power options for their sonic treasures.

£121.99
WAS: £125.00
 In Stock
View In Showroom
Request an appointment with one of our team
UK Next day delivery
Fast shipping with trusted couriers, get it next day!
Free UK delivery over £99
What you see is what you will get!
WAYS TO PAY:
Paypal, Visa, Mastercard, Maestro, Visa Electron & Delta
Description

When the celebrated CIOKS DC7 was released, it definitely caused a stir in the PSU market. With its ground-breaking low profile, low weight and high output connectivity, DC7 has quite rightly found its way onto thousands of pedalboards the world over. Now with the CIOKS 4 Expander, the range has increased to provide pedal devotees even more low noise power options for their sonic treasures.

CIOKS 4 Expander is not only the perfect companion to the CIOKS DC7 (via the DC7s 24 V outlet), with its four additional outlets, selectable 9, 12, 15 and 18V DC on each tap, each outlet can deliver up to a staggering 660 mA! But that is definitely not all as CIOKS 4 can be also be used stand alone in a variety of ways. 

What makes CIOKS 4 truly unique is the fact that you can power it with pretty much any adaptor from 9-24 V DC or 9-12 V AC via the non-polarized DC socket input, USB via its 5 V USB C input or even by using a tablet or laptop power supply.  This flexibility means that, depending on required output power, you can use CIOKS 4 as a stand-alone unit with supplies such as 1-SPOT, GigRig Generator, a laptop or even your iPad charger and at the same time cleaning up noise and isolating each of the 4 DC outlets from each other.

In addition, via the 24V inlet, CIOKS 4 can also be used to expand other brands PSUs (such as the Strymon Zuma etc.) or convert an unused AC outlet to provide 4 additional isolated DC outlets but with minimal weight increase. All of this means that CIOKS4 is the most flexible little power supply the world has ever seen!

  • Ground-breaking low profile and weight
  • 4 isolated DC-outlets, each providing up to 660 mA (at 9 V DC) - total maximum output power 24 W*
  • Ultra-low noise achieved by multi-stage filtering
  • Independently selectable voltage on each outlet
  • 5 V USB C Input - for powering the unit with a powerbank or USB C adapter
  • Non-polarized input DC socket - accepts anything from 9-24 V DC or 9-12 V AC
  • Global overload status LED
  • Mounting hardware for Pedaltrain and Templeaudio boards included
  • Compatible with CIOKS Mini GRIP - for drill-free mounting on Pedaltrain boards
  • 24V link and 5x Flex cables included
  • Designed in Denmark, assembled in Poland

Input 1:   5V DC (USB C socket)
Input 2:  9-24 V DC or 9-12 V AC (non-polarized 5.5/2.1mm DC socket)
Outlet 1-4: 

  • 9 V DC / 660 mA or
  • 12 V DC / 500 mA or
  • 15 V DC / 400 mA or
  • 18 V DC / 330 mA each
  • Output power: max. 24 W in total*

* Total output power of 24 W can be achieved provided an appropriate and sufficient input power source is applied. For full output power please use a 24 V DC source with min. 30 W of power capability such as CIOKS DC7). 

Total of five Flex cables, all 2.1mm (BOSS standard), are included. The user is able to power 6 pedals with the included Flex kit.

  • 2 x 1030 - Type 1 - 5.5/2.1mm DC-plug, centre negative, L-shape, 30cm (black)
  • 2 x 1050 - Type 1 - 5.5/2.1mm DC-plug, centre negative, L-shape, 50cm (black)
  • 1 x 1533 - 3-way daisy chain Flex type 1, 30+30+50cm (black)
 
COMPARISON BASKET COMPARE