Skip to content Darkglass Programmable Series | Aggressively Distorting Advanced Machine - Peach Guitars
We are open for pre-booked appointments only. To learn more about our appointment system, click the button to the right
Opening Hours
Darkglass Programmable Series | Aggressively Distorting Advanced Machine
£0.00
CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Email
Request A One-On-One Appointment
Let us know what you would like to see, and our team will prepare everything for your one-on-one appointment at our showroom.
Preferred Appointment Time:
Products Of Interest:
* Required Field
Plek This Guitar
Please read the terms & conditions below before confirming that you wish for us to including a Plek setup on this guitar.
Choosing to have your purchased guitar Plek’d will delay the shipping. One of the team will be in contact with a rough ETA but we will endeavour to have your new guitar with you as quickly as possible. Current lead time is 2-3 weeks from the date of purchase.
If you choose to return the guitar after it’s had a Plek setup you will still be liable for the cost of the plek setup except for in cases where we’ve offered it as part of a promotion or offer.
We reserve the right to withdraw our free PLEK promotion offer at any time. Suhr Guitars are excluded from this promotion at their request. All orders must be completed through the Peach Guitars website, this offer does not apply to Reverb sales. Choosing to have your purchased guitar PLEK'd will delay the shipping. One of the team will be in contact with a rough ETA but we will endeavour to have your new guitar with you as quickly as possible. Please bare with us as we work though the backlog!Please ensure that you have redeemed this offer before placing your order. if no PLEK setup has been added to your order then your guitar will undergo our standard setup process and not receive a free PLEK setup
View full terms & conditions

Darkglass Programmable Series | Aggressively Distorting Advanced Machine

Adam Nolly Getgood Signature Pedal

The Aggressively Distorting Advanced Machine (ADAM) is the result of a collaboration with one of the most celebrated artists in today's metal scene - Adam "Nolly" Getgood. This pedal captures Nolly's entire tonal arsenal meticulously refined by years of in-depth testing and experience in one striking enclosure.

The Aggressively Distorting Advanced Machine has three fully programmable rotating footswitch presets. Each of these stores your unique blend of compression, distortion, impulse responses, EQ parameters and signal chain settings. Featuring a unique and innovative top-notch precision touch slider interface, for its 6-band programmable EQ.

It also incorporates a USB-C audio interface and balanced stereo outputs for studio monitors and is equipped with an extra accurate chromatic tuner, that also works well with down-tuned guitars and basses.

£0.00
View In Showroom
Request an appointment with one of our team
UK Next day delivery
Fast shipping with trusted couriers, get it next day!
Free UK delivery over £99
What you see is what you will get!
WAYS TO PAY:
Paypal, Apple Pay, Google Pay, Mastercard, Maestro, Visa, Visa Electron & AMEX
Description

Compression - Controls the amount of input gain to the compressor and intelligently applies the correct amount of makeup gain so that your signal is always driven at the appropriate level, no matter how much compression is applied.

Drive - Adds distortion and drive to your signal. Crank this knob to apply Nolly's favourite vintage distortion to the distorted part of the signal chain.

Character - Changes the tone of the distortion, adding brightness to the distortion signal.

Blend - Mixes between the distortion signal and the clean sidechain signal

Level - Controls the master volume of Aggressively Distorting Advanced Machine.

Touch Sensitive Sliders - Each slider has a -12 dB to 12 dB range. From left to right, the frequency bands for each slider correspond to a low shelf, 250 Hz, 500 Hz, 1.5 kHz, 3 kHz, and a high shelf.

Input - This is the primary instrument input on Aggressively Distorting Advanced Machine. Connect your instrument or output from your pedal board to the 1/4" mono jack.

Aux In - The stereo input of Aggressively Distorting Advanced Machine enables the playback of backing tracks while practising or recording. Connect your mobile phone, laptop etc. to the 1/8" stereo jack.

Headphone Output - The headphone output can handle headphones with an impedance of 16 - 600 ohms. Connect your headphones to the 1/8" stereo jack and set the desired level from the dedicated potentiometer next to the jack.

Balanced Outputs - The two balanced outputs add routeing versatility and the option of using Aggressively Distorting Advanced Machine as a fully equipped audio interface.

Direct Output - An XLR output with a ground lift switch provides a reliable standard connection to a mixing desk or an external audio interface for a guaranteed low-noise signal.

MIDI In - A standard 1/8" TRS jack allows connecting an external MIDI controller to Aggressively Distorting Advanced Machine for even more flexibility. The supported adapter is TRS-MIDI Type B.

USB - The USB-C port unlocks Aggressively Distorting Advanced Machine’s USB audio interface capabilities and enables interaction with the Darkglass Suite desktop app, allowing for software updates and access to the Darkglass IR library, containing hundreds of cabinet simulations. USB MIDI In/Out is also supported.

DIMENSIONS - 18x12x6 cm | Weight 0.7 kg

WARNING - The Aggressively Distorting Advanced Machine has a current draw of 500mA. Only use a regulated 9V DC adapter with a centre-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty

 
COMPARISON BASKET COMPARE